Description
A 2005 Randall RM100C modular tube combo amp in great condition. This versatile combo includes the Clean, Blackface, and Plexi MTS modules. Aside from some scrapes on the knobs of a couple modules (see photos), the amp is in excellent condition. This amp has been cleaned and tested. It is fully functional and sounds great. No footswitch included.
Manufacturer's Description...
Our flagship sets the standard and will forever revolutionize how future tube heads are designed. The RM100 is both traditional & modern technology rolled into one amplifier. First you have 3 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don’t purchase an amplifier because you like just the clean or hi-gain tone. Build this amp with your clean, your rhythm, and your hi-gain tone for a complete custom set-up. With more than a dozen tube preamps always available, chances are you’ll have a hard time picking just three.
Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Simply replace the small protection fuse and tube using a small voltage meter and screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.
Connect your RM100 to any MIDI capable effects processor and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect using the RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the effects processor to save the preset. The footswitch will then select both the RM100 channel and effect you want at the same time.
Overview
-Power Output: 100 Watts
-Tubes: 6L6 (4), 12AX7 (3) + 2 12AX7 per module
-Speakers: 2-12" Celestion G12T-75
-Master Controls: Density, Master, Presence, Effects
-Channel Controls (x3): Gain, Bass, Middle, Treble, Level -Dimensions: 29.5" x 22" x 12"
-Weight: 92 lbs
Features
-MIDI in/thru
-Master Volume, Presence, Density controls
-Parallel loop w/front panel mix control
-Series loop
-Rear tube bias section
-Slave out
