Description
Radial Engineering's Reamp JCR Passive Reamping Device is the perfect tool for producers looking to thicken up their guitar and bass tracks. Based on the legendary designs of the John Cuniberti Reamp, the JCR is one of the best passive reamping devices available on the market.
Though the Reamp JCR has a wide array of studio applications, using it couldn't be simpler. Just plug into the JCR's 1/4" or XLR input, run a cable from the 1/4" output to your favorite amplifier or effect, and you'll be all set to start reamping your tracks for maximum sonic exploration.
The Reamp JCR sports several advanced performance features to keep up with the demands of the modern producer. Thanks to its built-in phase inverter, users will be able to accommodate the polarity needs of amps and effects that invert the phase of an incoming signal. It also has a ground lift to help eliminate any annoying hum coming from ground loops. Complete with a mute and a 3-position filter switch with high-cut, low-cut, and bypass options, the Reamp JCR has tons of versatility under the hood.
Once you've set up the Reamp JCR, the sonic possibilities are endless. If you're looking to add a rich, gritty doubling effect, you can use the JCR to take a pre-recorded guitar track, send it through a second distortion pedal and amp, and add a slight delay for massive, snarling riffage. Users could also reamp vocal tracks with distortion or fuzz pedals to add speaker-shredding undertones to their performance.
All packed up into a 14-gauge steel chassis, the Reamp JCR from Radial Engineering is built to last a lifetime. Whether you're a budding producer or a vetted mixing engineer, the Reamp JCR is an extraordinary device that is sure to unlock your true creative potential.
Specs
Audio circuit type: Passive, transformer isolated
Frequency response: 20Hz ~ 20kHz (+0dB/-1dB)
Dynamic range: 140dB
Total harmonic distortion: 0.001% @ 1kHz/0dBu input
Intermodulation Distortion: 0.0025% @ 1kHz/-10dB input
Phase Deviation: 2º @ 100Hz; 0º @ 800Hz
Input Impedance: 1800 Ohms
Output Impedance: 4.8k Ohms
Common Mode Rejection Ratio: -55dB @ 55Hz
Noise: -115dBu
Maximum Input: +26dBu
Features: 180° polarity reverse, Ground lift, HPF, LPF, Level Control
Input Connectors: 1/4" TRS, XLR
Output Connectors: 1/4" unbalanced
Construction: 14-gauge steel chassis & outer shell
Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.32 lbs. (600g)
Power: Passive, no power required
Conditions: For use in dry locations only between 5 - 40 degrees celsius
SKU: R8001030
