Description
Mesa Boogie's MIDI Matrix allows you to automate footswitchable functions via MIDI, with an easy to use interface and road-ready design. It connects to your amp via XLR or 1/4" cables, and with up to 250 custom presets, support for latching or momentary operation, relay-based switching, and isolated jacks, the MIDI Matrix has everything you need for high-quality, noise-free use.
Features:
-The MIDI Matrix Amp Controller replaces a MESA/Boogie amplifier's multi-pin DIN/XLR or 1/4" foot-switch and automates foot-switchable functions via MIDI
-3x10 DIP Switch Array and MESA Pre-Configurations eliminate the need for custom cables or dongles to control virtually every MESA/Boogie Amp ever made.
-Stores up to 250 Presets
-Accepts MIDI Program Change and Control Change Messages
-Compatible with all MIDI Foot-Controllers, MIDI capable Multi-Effect Pedals and Pedalboard-based MIDI Loop Switchers
-Illuminated, Instant Access On/Off Buttons
-Eight Switching Functions can be configured for Latching or Momentary, normally open or normally closed switching, and arranged into two linked groups
-Isolated Relays with gold plated, silver alloy, fully sealed contacts for maximum switching compatibility and reliability
-The 8-pin DIN and two 1/4" TRS Switching Jacks are completely isolated, preventing ground loop hum and noise, and allow simultaneous control of up to three amplifiers or products
-Uses an amplifier's existing multi-pin or 1/4" foot-switch cables, standard 1/4" cables, retail 1/4" adapter cables, or a MESA DIN7-to-XLR6 cable (for the Mark IV, Basis M-2000 and Quad Preamp w/ 6-Pin Foot-switch)
-User Data Dump & Load of all User Presets and Configuration Settings via MIDI (with CRC error detection)
-Software updates via MIDI
-Conveniently accepts 9V AC or DC via 2.1mm x 5.5mm barrel plug
-Provides phantom power to MIDI foot-controllers via 7-pin MIDI cable
-Rotatable keyed bottom Mounting Plate for Combo Amp or Effects Rack Installations
Specs:
-Minimum Operating Voltage: 9V DC
-Maximum Operating Voltage: 12V DC
-Maximum Current Draw: 250mA @ 9V DC
-Power Adapter (not included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9V AC or DC, or maximum 12V DC, with a 2.1mm x 5.5mm Barrel Plug - Accepts Negative or Positive Center DC Polarity
-Dimensions (W x D x H): 5.23"x 4" x 1.59"
-Bottom Mounting Plate, Rotatable (W x D x H): 4.97" x 3.69" x 0.063"
-Weight: 0.9lbs (408.2g)
