Description
The Rainger FX Snare Trap is a drum machine that uses a combination of digital and analog tech to deliver players a wealth of different backing tracks. Simply push the red PAD button in, and tap in your tempo using the big pad to get a beat started. The bass drum, sidechaining and low-pass filter are analog, while the snare, hi-hats, delay, and tap tempo are all digital. The Snare Trap's intuitive controls include a large circular rubber pad, which has a few different functions, including tap tempo programming, white noise bursts, and snare drum fills. It also features a handy Mix knob to balance the Snare Trap's drums and your instrument, while you get a Lo/Hi Cut Off knob to further contour your drum beats' tone. If you're after a handy tool to make inspired backing tracks, then the Snare Trap by Rainger FX is your best bet!
Overview:
-The Snare Trap is a beatbox you play guitar or keyboard/synth through!It can be used on a desk (by hand) or on the floor (by foot). It has handy shortcuts to get a beat going quickly.
-It has built-in delay, low-pass filter, side-chaining, beats and instrument mixed to a single mono output.
-Use the internal tap tempo (correctible), or trigger the sounds individually with external triggers.
-It's an analogue/digital hybrid, the tap-tempo, delay, and white noise part of the snare and hi-hat being digital, all else analogue.
-To get a beat going, push the red PAD button in, and tap in your tempo using the big pad (adjustable at any time with single or multiple hits).
-To erase the tempo and start again, press and hold the big pad for one second.
-Push the red PAD button out to switch the big pad function back to white noise fills.
-The first bass drum is always on the '1', the snare drum on the '2' and '4'.
-The second bass drum - BD2 - is moveable, using the 'BD2 knob'. Start with it fully CCW - with BD2 on the '3' - and as you turn the knob the bass drum moves later and later ...
-Add in delay on the snare drum to create more rhythms and dub-like effects ...
-The 'HH 4s' button switches the hi-hat from the default '8s' pattern, to offbeat '4s'.
-The 'CUT-OFF' control is a low pass filter, acting over the beats (leaving instrument unaffected) * Press the 'side chain' button to add sidechaining to your instrument.
-The LFO button adds modulation to the 'CUT-OFF' control.
SKU: SNARETRAP
