Solid Gold FX Electroman MKII Modulated Delay Pedal


We're sorry. This item is no longer in stock.


The ElectroMan MKII is Solid Gold FX's vision of analog delay perfection. With 600ms of rich, articulate delay time, a wide raging tone contour, FX insert, and a custom Warp switch the ElectroMan MKII is a true hybrid, giving users total creative control over their sound. Use the tone knob to shape your ideal delay voice, pushing your repeats forward in the mix, or allowing them to dissolve into a beautifully murky wash. Generate new delay textures by applying your favorite effects to the wet signal via the FX insert. Use the Warp switch to punctuate passages with a rising tide of oscillation. The choice is yours. With its unique feature set, the ElectroMan MKII is guaranteed to inspire.

Level: Changes the amount of wet signal from nothing at all to highly involved.
Repeat: At zero, you'll find the humblest of all delays: the slapback. At full-blast, the repeats will run away and overtake your signal.
Color: This control takes a little treble off the top as you turn it. Fully left is bare-naked digital, and turning it up increases the murk.
Flutter: Controls the modulation depth. Keeping this control at zero shuts the circuit off.
Time: Changes the delay time from a double tracking-esque 70 milliseconds to a full lengthy second.

Warp (toggle): Changes the intensity of the Warp footswitch across three modes, from subtle (center) assertive (left) to imminent lift-off (right).
Mode: Changes between standard delay (left) and a special second mode(right), which sends the repeats slamming into the second delay line at half time.
Speed: Offers three different speed settings of the modulation circuit - slow in the center position, fast when toggled right and medium in the left position. See also: flutter knob.
Tails: The Electroman MKII is buffered bypass, and this switch lets you decide how you want the repeats to behave with the pedal switched off: choked off when switched left, or trailing when switched right.

FX Loop Jack: This jack lets you attach a stereo Y-cable, allowing you to patch in any number of effects. These effects let you apply external effects only to the repeats, for endless amounts of fun. You can even run a full external pedalboard in this loop. We won't tell. In addition, the loop also doubles an an expression input to control the level knob.
Input: Instrument or other pedal goes here.
Output: Amplifier or other pedal goes here.
Warp Footswitch: Engaged self-oscillation when and where you want it, and relents when you release it.
True Bypass/Trails Footswitch: Turns effect on and off.

The Electroman II requires a center-negative 9VDC power adapter with at least 40mA of current (not included). Almost all power supplies meet this requirement, but check yours first.

4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)